3 in 1 Automatic Bottle Filling Machine For Carbonated Drink / Juice Soft Drink 200-2000ml

Gas Beverage Rotary 3 in 1 Filling Machine/Coke Cola Washing-Filling-Sealing Machine

                                           Automatic carbonated beverage filling machine

Washing Part

1) PET bottle running into the washing part by dividing starwheel, the bottle clamped by the clamp and the flip device and rotating to the bottle down, sterilizing water rinsing and drain. And then auto rotating to the bottle up, delivered to the filling part by the bottle out starwheel.

2) Main material and part contact with liquid all made of SUS304.

3) Open gear transmission.

4) Complete SUS304 clamp, easy to adjust; Less contact with the bottle area, effective to avoid the secondary pollution of bottle.

5) The washing equipped with the water drain pan to collect the rinsing water.

6) Rinsing consumption: 105ml/s per bottle (0.25Mpa).

Filling Part

Filling machine is the introduction of German technology in our country, use the isobaric filling principle to design and manufacture.

1) The filling valve uses pressure type mechanical valve, filling fast and sensitive, high precision.

2) Filling system use the block bottleneck entering technology, avoiding the bottle-mouth second pollution.

3) The main drive adopts gear drive which is open type composite transmission, high efficiency and lower noise.

4) Adopt inverter to control the machine's main motor speed, stepless frequency control of motor speed.

5) The machine adopts PLC automatic control, the online fault display, such as blocking bottles, such as lack of cover.

6) The liquid in the filling tank can automatic control, liquid level sensor detecting the liquid level to ensure the stable of the liquid level and filling.

7) The key spare parts and electrical components imported from famous brand.

Capping Part

1) Magnetic constant torque screw capping machine, Screw cap effect is stable and reliable. Block defect rate ≤0.2% .

2) The cap unscrambler equipped with wrong cover device, if the cap is not in correct condition it will back to the unscrambler automaticly.

3) The cap unscrambler with sensor, it will automaticly feeding when there is no caps, and it will stop when the caps are full.